玩游戏红包

单壁波纹管设备

categories of news

Product Categories

contact us

Company Name: Qingdao Xinsu Machinery Co., Ltd.

Contact: Manager Li

Phone: 13780637108

Mobile: 13780637108

Email: 2030301577@qq.com

Website: mfjkzx.com

Address: North of Yangjialin Village, Jiaobei Sub-district Office, Jiaozhou City, Qingdao City, Shandong Province

Technical requirements for production of plastic bellows production line

Your current location : Home >> News >> Transformer knowledge

Technical requirements for production of plastic bellows production line

作者: Release Date: 2019-07-02 Author: Click:

Plastic bellows production line is a special plastic pipe production line equipment for producing plastic bellows (including single-wall bellows and double-wall bellows). The plastic bellows produced by it must meet the following technical indicators:

1. Raw material requirements

HDPE (high density polyethylene), PP (polypropylene), and PVC (polyvinyl chloride) particles can be used for the plastic bellows. The requirements must be the original granular raw materials. It is strictly prohibited to use powdered and re-granulated granular raw materials. HDPE must meet GB / T11116 standard requirements, and PP must meet GB / T18742.1 standard.

2. Color appearance requirements

The appearance of the plastic bellows should be smooth, with small roundness, uniform color, and no cracks, bubbles, cracks, lumps, or scratches affecting the use of separators are allowed on the inner and outer walls.

3.Ring steel requirements

The stiffness of the double-walled plastic bellows ring should not be less than 6 kN / m2. The ring stiffness of the prestressed plastic bellows is not less than 4 kN / m2.

4, flexibility requirements

After the plastic corrugated pipe is repeatedly bent five times according to the prescribed bending method, the change in cross-sectional diameter should not be greater than 10% of the original diameter.

5. Impact resistance requirements

The maximum allowable TIR value of the true impact rate of the plastic bellows drop weight impact test is 1/10.

波纹管生产线

6.Local lateral load

Plastic corrugated pipe When the corrugated pipe is subjected to a lateral load of 500N, the surface of the pipe will not crack, and the remaining deformation of the pipe 5 minutes after unloading shall not exceed 10% of the nominal inner diameter of the pipe.

7.Sealing requirements for bellows connection

There is no water leakage inside the corrugated pipe connection, and the bonding between the pipes should be tight, no cracks, no loosening

Qingdao Xinyangsen Plastic Products Development Co., Ltd. is a professional manufacturer of plastic machinery and equipment. It has a group of highly qualified and experienced engineering and technical personnel who specialize in single-wall corrugated pipe, double-wall corrugated pipe production lines and double-wall corrugated pipes. The production line is a high-tech enterprise integrating scientific research, development, production, sales and technical services. The company pursues the tenet of "refining quality, treating customers with integrity, pioneering and innovative, and forging ahead". Xinyangsen adheres to the "synchronization with the world level" The concept of "combining the superior resources of the world's plastic machinery equipment, from the main machine to the auxiliary machine, perfectly reflects the requirements of efficient extrusion, represents the level of similar domestic products. At present, the company's products are exported to more than 20 provinces and cities nationwide, and far Selling abroad, it is a key manufacturer in China's plastic processing industry.

URL of this article: http://mfjkzx.com/news/399.html

Keywords: bellows production line

Recently Viewed:

    online service
    share it One-click sharing